Can't get my 91 Cherokee w/ 4.0 to start, New plugs, wires, cap, rotor, and distributor, HAS SPARK, 30 psi fuel pressure, timing appears to be right,

Can't get my 91 Cherokee w/ 4.0 to start, New plugs, wires, cap, rotor, and distributor, HAS SPARK, 30 psi fuel pressure, timing appears to be right, 1 answer

I replaced the rotor Cap wires and plugs got fuel and spark won't fire 4 answers

92 Jeep Cherokee I replaced the wires the plugs the distributor cap and rotor I have spark and I have fuel but it won't start what do I do

1999 jeep cherokee runs rough, stalls no check engine light is on. it has fuel pressure ,plugs cap and rotor are like new the only memory code is po132 o2 upstream sensor reported high voltage what could be the problem? 3 answers

no check engine light is comming on but hesitates and sometimes stalls plugs,cap.rotor and wires are in very good condition,has good fuel pressure. the only code stored was p0132 upstream o2 sensor h...

96 Jeep Cherokee hard to start 4 answers

My Jeep Cherokee has recently become difficult to start when cold. It runs great once started, no misfires or hesitation. Based on info from other sources, I have tested my fuel pressure. This was 5...

1993 Jeep Cherokee Will not Start, Has fuel and spark 44 answers

Im about to set my Jeep on fire! :-( I have a 1993 Jeep Cherokee with a 4.0 L high output engine. It was -12 outside, yet The jeep started fine no problems, it was a sob to try and get it to shift ...