99 ford ranger
So my 1999 ford ranger 4.0 engine 4x4 started
slipping going into 3rd. I thought it would go away
but then later on it started slipping going into 2nd. I
changed the filter, fluid and gasket on the
transmission. After I did that I took it for a drive and
it stopped slipping into 2nd but still slips going into
3rd. When I changed the fluid and filter there were
no metal or brass chips in the pan. Any ideas what I
need to do to fix?
Try adding some Lucas Transmission Stop Slip to transmission do not over fill remove same amount of trans fluid as on bottle of Lucas.
I added some slick 50 automatic transmission treatment in with it
I drove the truck for maybe 20 or 25 minutes. Should it start shifting better now? Or I have to wait a while
Never used that brand before but it should say on the bottle when you should start seeing a difference if it is going to work.
Looking for a Used Ranger in your area?
CarGurus has 6,243 nationwide Ranger listings starting at $1,595.
Search Ford Ranger Questions
Ford Ranger Experts