what years can I swap motors with in my 1989 K2500, 350
Asked by steelguy94 Mar 19, 2016 at 12:03 PM about the 1988 Chevrolet C/K 2500 Silverado Standard Cab LB 4WD
Question type: Maintenance & Repair
I have a late 1988 newer style K2500 with a 350 in it. I am looking to swap it out for another motor. What years would be interchangeable with it?
3 Answers
tennisshoes answered about a year ago
Almost any 350 will work, and with a little work you can even get a vortec to work with your existing engine management system.
steelguy94 answered about a year ago
What all would I need to do. What if I want to go back to carb & distibutor.
Your Answer
Related Questions
-
what years can I swap motors with in my 1989 K2500, 350 3 answers
I have a late 1988 newer style K2500 with a 350 in it. I am looking to swap it out for another motor. What years would be interchangeable with it?
1988 Chevrolet C/K 2500 Silverado Standard Cab LB 4WD
-
Maintenance & Repair
-
Can my 89 k2500 run without air pump. 1 answer
Bought my 3rd adjustable fuel regulator kit and it was the jet billet with new gauge and high pressure diaphragm and I can go up to 20 lbs. runs a lot better....... However it still has a bog at 1/2...
1989 Chevrolet C/K 2500
-
Maintenance & Repair
-
What would cause my 1995 chevy k2500 to stall when shifting from park to drive? 1 answer
just put a new crate motor in my 1995 chevy k2500. new cap, rotor, plugs, wires, oxygen sensor, engine idle control. truck idles erratically. idles about 800 rpms but drops to 500 or blow and stalls...
1995 Chevrolet C/K 2500 Silverado Standard Cab LB 4WD
-
Maintenance & Repair
-
I have a 1989 Silverado with a remanufactured tbi, new injectors, new Russell performance stainless line, an6 fittings, new ac delco fuel pump, new fuel tank and I'm only getting 6 psi at my Tbi. I have an adjustable fuel pressure regulator and new diaphragm and spring. When I kink the return line it jumps to 14psi. No kinks in the lines. Please help. 3 answers
I have a 1989 Silverado with a remanufactured tbi, new injectors, new Russell performance stainless line, an6 fittings, new ac delco fuel pump, new fuel tank and I'm only getting 6 psi at my Tbi. I ...
1989 Chevrolet C/K 2500
-
Maintenance & Repair
-
I put a 383HD in my 94 Chevy K2500. It had 400 miles on it when it blew both head gaskets. Dealership condemned the engine as being assembled incorrectly by the factory. Installed second. same result. 2 answers
Both head gaskets blew out in less that 15 miles this time. I pulled the O2 sensor and found it was wet. My suspicion is the catalytic converter was plug by the first failure but wasn't addressed when...
1994 Chevrolet C/K 2500 Cheyenne Extended Cab SB
-
Maintenance & Repair
Looking for a Used C/K 2500 in your area?
CarGurus has 198 nationwide C/K 2500 listings starting at $6,495.
Shortcuts
Search Chevrolet C/K 2500 Questions
Chevrolet C/K 2500 Experts
-
#1RowefastReputation290
-
#2COMETGUY61Reputation190
-
#3Andrew OlsenReputation140
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.