1995 honda accord
Do I set it in the middle
You always make the position of the rotor before removing, but you can use this method..http://www.junkyardgenius.com/ignition/dist01.html
First its easiest to INDEX it before its removed by marking a tab (paint mark) where it attaches to the cylinder head! Did you remove it to replace the O-ring? if so look close at the housing tabs wipe them off, set it as close as to possible to the original bolt marks tighten the bolts directly over the marks.... IF its a new distributor install it with the bolt in the middle of the slot. After you have your timing light connected start it and set to 1995 specs.
Looking for a Used Accord in your area?
CarGurus has 76,808 nationwide Accord listings starting at $1,395.
Search Honda Accord Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Honda Accord Experts