Brake pedal is low on first pump and will go to floor under pressure, but will stop the van,it has new calipers and new master cylinder
Did you bleed all the air out of the system after replacing master cylinder?
Needs to be bled. If you are going to say - already did- needs it again
Yep air in the system, you may have air trapped in the RABS unit on the Antilock system, there maybe a bleeder on the unit itself. If you still can't get it bled properly you might have to take to a shop that can do reverse bleeding.
I bleed after replacing master, I bleed again at all calipers....I like the answer that air is in the RABS . I will look for a bleeder on the unit... Thanks for all answers Charliee
I just though of something, did you bench bleed the master cylinder before you put it on your rig?
Yes I did , have a lot of fluid through the bleeders
OK I was just trying to cover the bases.
Looking for a Used E-Series Cargo in your area?
CarGurus has 3,080 nationwide E-Series Cargo listings starting at $2,200.
Search Ford E-Series Cargo Questions
Ford E-Series Cargo Experts