I have a 2008 ford crown victoria i cleaned the throttle body and changed the throttle position sensor now it won't stay cranked and my throttle wont move please help

Asked by Oct 30, 2015 at 10:59 PM about the 2008 Ford Crown Victoria Police Interceptor

Question type: Maintenance & Repair

8 Answers

25,525

need a better explanation,,,align everything again..the right way.. you said wont stay cranked...or running??? try again,,

Since i cleaned the throttle body and changed the throttle position sensor i cranked the car but it wont stay running i have nothing coming from the throttle at all.....my fault

1,565

the t.p. sensor is spring loaded sounds like you need to take it off and reinstall ip properly

47,765

Retrace your steps, check to see if TPS is installed properly and double check electrical connections to see if any were left loose.

Thankz guys i just got done taking things unloose ill take extra caution reinstalling everything i hope this also isnt also the gas pedal sensor stay tuned

I pieced everything back i have very little rpm's and it stayed cranked after two tries but i noticed a gas leak above but between cylinders 1 and 2

The computer needs to relearn the throttle value. First disconect pos and negative battery terminals then touch the pos with negative connectors for minute or so don't touch the battery terminal at all then reconect terminals to battery positive first then negative then turn key on then wait 15 sec then start car but don't touch gas peddle this is the computer returning idle values from cold to hot allow 15 minutes then after that drive around for a while for the computer to learn the shift values

The computer needs to relearn the throttle value. First disconect pos and negative battery terminals then touch the pos with negative connectors for minute or so don't touch the battery terminal at all then reconect terminals to battery positive first then negative then turn key on then wait 15 sec then start car but don't touch gas peddle this is the computer returning idle values from cold to hot allow 15 minutes then after that drive around for a while for the computer to learn the shift values, note every time you change any part of throttle body parts the throttle motor or gears you need the mcg to relearn the new values you tube will have videos on this subject to learn from

Your Answer

Add photo

Related Questions

Crown Victoria

Looking for a Used Crown Victoria in your area?

CarGurus has 1,221 nationwide Crown Victoria listings starting at $1,595.

ZIP:

Search Ford Crown Victoria Questions

Ford Crown Victoria Experts

#1 Tracy Hooks
Tracy Hooks
Reputation 1,790
#2 Tom Demyan
Tom Demyan
Reputation 1,000
#3 tennisshoes
tennisshoes
Reputation 700
View All

Related Models For Sale

Used Mercury Grand Marquis
30 Great Deals out of 1,835 listings starting at $2,000
Used Dodge Charger
454 Great Deals out of 29,317 listings starting at $2,300
Used Lincoln Town Car
34 Great Deals out of 1,791 listings starting at $1,500
Used Ford Mustang
543 Great Deals out of 45,840 listings starting at $1,999
Used Ford Taurus
270 Great Deals out of 20,569 listings starting at $1,995
Used Chevrolet Impala
589 Great Deals out of 34,066 listings starting at $899
Used Ford Explorer
926 Great Deals out of 70,243 listings starting at $997
Used Ford F-150
2,068 Great Deals out of 207,301 listings starting at $1,499
Used Chevrolet Tahoe
556 Great Deals out of 31,361 listings starting at $1,500
Used Dodge Challenger
212 Great Deals out of 23,426 listings starting at $7,990
Used Honda Accord
941 Great Deals out of 77,703 listings starting at $899
Used Chrysler 300
401 Great Deals out of 19,197 listings starting at $850

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.