My Ford F150 4WD had the clutch, pressure plate, t/o & pilot replaced less than one year ago with heavy duty lifetime parts. Recently, there is a loud squealing noise when clutch pedal is depressed. Is this the t/o bearing gone bad? If so, how?

My Ford F150 4WD had the clutch, pressure plate, t/o & pilot replaced less than one year ago with heavy duty lifetime parts. Recently, there is a loud squealing noise when clutch pedal is depressed. Is this the t/o bearing gone bad? If so, how? 2 Answers

Thank you for your comments about my problem with my 1996 for f150, I checked to see if the fan clutch was able to move, it is very secure, there has been a new serpenteen belt put on. So still don't know what is causing the noise, happened one day after it was worked on. 1 Answer

truck is making a noise like some thing is hitting the fan or fan is hitting something this happened after serpenteen belt was put on, a new water pump, and a throttle control sensor, because my tru...

when I first start my F150 it has a loud ticking noise but then quiets down after it is warm but the noise is still there 2 Answers

F150 has loud ticking on initial start-up. but quiets as the engine gets warm. Although the ticking is still present but not as loud.

I have a 1989 ford f150 4.9 pickup. I'm having trouble shifting gears, a mechanic said there is a clutch arm bushing that may be bad located under the dash.Can u tell me the name of this part, 1 Answer

How to replace the clutch arm bushing located under the dash, gears shift good sometimes, other times they shift rough

Is there a reset button for the a/c clutch? 6 Answers

My a/c clutch will not engage? I have checked the fuse and it is fine, maybe a relay problem or pressure switch?