I have a 1991 Daytona Shelby, it wont start, the fuel pump was replaced as well as various other things, Help with a little diagnossis on why it wont start?
It has the IROC FMIC, K&N intake, full straight 3" exhaust, upgraded injectors, custom tune, walbro fuel pump, new Garret turbo, MBC set at 16lbs of boost, new ignition, new map sensor, new TPS, new O2 sensor.
All of this was done by the previous owner I bought the car for real cheap and was hoping to restore it. The work was done by mechanics.
The car turns over but no start
I would start with the Fuel pump silinoid. Common issue with the car. Cost about 20 dollars at autozone or any other auto parts store. Also make sure distributor is aligned correctly. Seen it many times the engine will not start because the cap is 180degrees off. (The cap can be installed backwards on the 90 turbo IV VNT 2.2 & 91 Turbo I 2.5L)
If your car has power door locks,get in,don't put the key in,lock and unlock 10 times then try ignition. Daytonas can be finicky.Good luck
Looking for a Used Daytona in your area?
CarGurus has 1 nationwide Daytona listings and the tools to find you a great deal.
Search Dodge Daytona Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Dodge Daytona Experts