no brake fluid to rear calibers linclon mark 7 88 model
tried to bleed from right rear and no
fluid. i opened all bleeders first so they
wwould drain the old out brakes were
real hard when i started now ive got all
lines closed trying to bleed but now
back calibers wont release fluid? any
did you take the bleeder vavle all the way out?? clean hole in caliber out with a paper clip ???
Bleeder screw may also be clogged. Clean bleeder screw and blow in end of it if can not blow through clean with paper clip like Kelly mentioned cleaning out the caliper hole or just replace bleeder screws.
The rear calipers of our 1985 (first year for anti-loc) to 1992 Lincoln Mark VIIs are bled mechanically. If ANY of these steps fail, the step must be addressed and corrected BEFORE proceeding to the next step. Start with a closed system. Verify that the system reservoir is properly filled. Turn the key to run (not start) and verify that the brake system pump works. Turn the key to off. Manually pump the pedal 20 times to relieve pressure. Open rear bleeder valve. Turn key to run. Maintain a constant brake fluid level in the reservoir until clear fluid exits the bleeder. Close the bleeder.
Looking for a Used Mark VII in your area?
CarGurus has 14 nationwide Mark VII listings and the tools to find you a great deal.
Search Lincoln Mark VII Questions
Lincoln Mark VII Experts
Related Models For Sale