fuel pump, filter, and pressure regulator is working. but the hose between the pump and filter isn't working. help????
1 Answer
Tracy answered 3 years ago
How is that possible? I don't understand. You say that the pump, filter and regulator are working and a hose failed? Change the hose. I have to ask though, what was the fuel pressure reading? A squirt out of the schrader valve means almost nothing. Electric, in-tank fuel pumps often fail and make noise - also, noise (other thn a soft hum) is an indicator of their pending failure. How did you determine that the regulator and filter are ok if there's no fuel delivery? There's a small black plastic canister that has a screw-off bottom that contains a cartridge fuel filter.
Your Answer
Related Questions
-
fuel pump, filter, and pressure regulator is working. but the hose between the pump and filter isn't working. help???? 1 answer
1986 Ford Bronco II STD 4WD
-
Maintenance & Repair
-
1988 Ford Bronco II starts with starting fluid but won't start on its own. Getting fuel and spark, new internal and external fuel pumps, filter. Any suggestions? Thanks! 2 answers
1988 Ford Bronco II XLT 4WD - Replaced internal and external fuel pumps, filter. Getting fuel and spark but won't start, however will start with starter fluid. Why aren't the injectors working? Than...
1988 Ford Bronco II XLT 4WD
-
Maintenance & Repair
-
I have a 88 Bronco. We replaced th high pressure pump but when we checked for fuel flow we got nothing out of the pump. 3 answers
We removed the rear line and there is flow out of the low pressure pump. Is there something we need to do. We replaced the the relay and filter also,
1988 Ford Bronco II Eddie Bauer 4WD
-
Maintenance & Repair
-
the wires to my fuel pump melted to my exaust mani and may have shorted out 9 answers
now my pump wont tern on i checked all the fuses including the relay and thje inertia switch but still nothing is there something else i may have fried some one please help and have a nice day
Ford Bronco II
-
Maintenance & Repair
-
Im having problems with my 1986 ford bronco 2 it was having problems with the fuel pump relay and i replaced it but no its getting air because it getting fuel and it works like 20 minutes and it start 1 answer
To fail like if the engine is not getting enough gas its a 2.9liter efi
1986 Ford Bronco II XLT 4WD
-
Maintenance & Repair
Shortcuts
Search Ford Bronco II Questions
Ford Bronco II Experts
| #1 |
|
tennisshoes
Reputation
590
|
| #2 |
|
Andrew Olsen
Reputation
230
|
| #3 |
|
Colin Rivet
Reputation
220
|
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.