i cant remove connection under steering column to replace ignition switch. Why?
I was told by a couple good guys on this site that my ignition switch needed to be
replaced. Thanks guys. So I removed 3 torx screws and there is something in the
middle that you need to do. You need a special tool or equivalent to do the job. Don't
have one Could that be a drill or dremel tool to remove what appears to be flat like a
rivet head. Can I drill it our or grind it off or is there something that could be damaged
by that process? Help please. Thank You, Kent
http://www.ehow.com/how_5394034_replace-ignition-switch-dodge-intrepid.html read this article
Search Dodge Intrepid Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Dodge Intrepid Experts