My 99 dodge durango will start but won't stay running already replaced the Iac and the throttle sensor and it still dies after you start it and my check engine light bulb is blown
My 98 would run rough, not stall out but act like it was. After a while it would cold start ok but then it wouldn't start after it was hot. It sounded like it wanted to, it would fire intermittently but wouldn't start. I read to pull the negative cable from the battery which resets the PCM board that might fix the problem. I did it and so far it fixed the problem, it starts & runs ok. This might be only temporary but from what I've read this could be from either a faulty cam sensor, anti theft system, or PCM board. Hope it helps.
Kbolender my 99 durango is doing the same did u ever figure out the issue?
Search Dodge Durango Questions
Dodge Durango Experts