P0340 code will not go away help
Is the car running?
Could be a wiring issue, With the key on unplug the cam sensor and using a voltmeter check for ground at the black and light blue wire. Check for 8 volts on the orange wire. Check for 5 volts on the tan/yellow wire
Car runs great asing as the CEL is off. With CEL on it cuts out like an electrical cut out off/on With code cleared it will idle perfectly, under acceleration the CEL comes on and car "bucks" Have replaced the cam pos sensor Crank pos sensor and PCM also checked wiring between the Pam and Cam sensor
I have gnd at Blk/lb 8 volts at Or 4.95 at T/Y
Wow, really strange everything is saying the car should not throw the code...have you thought about chaging your ECU? If you do it needs to be programed to the car..keep me updated im very interested in the outcome....
Looking for a Used Intrepid in your area?
CarGurus has 409 nationwide Intrepid listings starting at $1,950.
Search Dodge Intrepid Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Dodge Intrepid Experts