Will a 2001 Dodge Durango engine fit in a 2003 Dodge Durango slt
As long as they are both the same displacement it should bolt up just fine, however you may run into some intake and exhaust manifold changes between th two so you will have to swap the 03 stuff onto the 01 engine.
Thank you so much ..but like what stuff i just dont wanna make a mistake trying to get the truck fix and it dont work i wanna make sure i know everything i need is done the right way
You may have to change those just due to electronic connections for engine controls. You can always visually check those before you start and compaired, like is the ECT sensor in the same place and does it have the same connector, do that to all the sensors locations and connectors. You will most likely have to transfer the ring gear or flywheel depending on what trans the SLT has. I would also replace the rear main seal, pan gasket and the front pump seal on the transmission.
Thank you so so much i pray everything works out.,
Just don't get in a hurry, take it one step at a time and it all should go rather well.
I pray it works out i want my truck its a really great truck gods will no matter what ill let u know what happens!!
Looking for a Used Durango in your area?
CarGurus has 20,487 nationwide Durango listings starting at $999.
Search Dodge Durango Questions
Dodge Durango Experts