After reinstalling the engine the starter turns the engine for about 10 seconds and quits. the only codes that turn up are P1155 and P1639. any sugestions?

After reinstalling the engine the starter turns the engine for about 10 seconds and quits. the only codes that turn up are P1155 and P1639. any sugestions? 2 Answers

Started a buddys F350 and it idled for a bit but had no response from the foot pedal to rev the engine. After the truck idled it now just initially starts then shuts off after a quick rev. 5 Answers

F350 wont stay running after initial start up. It idled for a bit but now just starts, revs and stops. Zero response from the foot pedal and wondering about a throttle response sensor, fuse blown or...

WHERE ARE THE FUSES FOR THE 12 VOLT DASH AND REAR SEAT PLUG INS LOCATED 1 Answer

ALL THREE 12 VOLT PLUGS IN MY 2013 KINGRANCH QUIT WORKING, THE 2 IN THE DASH AND THE ONE ON THE RARE OF THE CENTER CONSUL, I ASSUME IT IS A FUSE ISSUE BUT CANNOT FIND THEM

Why wont My 2006 Ford F350 6.0 starts in the morning but after I drive somewhere and shut it off it won't start unless I spray starter fluid if I let it sit for about 2 hours or socook it will start 1 Answer

It turns over just won't start

where are all of the relays for the shift one the fly motor 5 Answers

I have a 4x4 that will not work with the switch. It has a new transfer case motor and a new switch on the dash. I have checked all the relays that I can find. I know there is one supposedly behind the...