I have jeep wrangler 2012 sport . I have a message up on starting the engine (change oil) I checked the oil it was recently changed and the level was within normal range. !!!!????
If the oil was recently changed, whoever changed it may have not reset the oil life monitor. You can do this yourself by keying on, with the engine off, and pressing the accelerator pedal all the way down to the floor 3 times within 2 seconds. Then key off and start the engine. If the message goes away, you did it right. Sometimes you have to do it a couple times for it to work.
Search Jeep Wrangler Questions
Jeep Wrangler Experts