2001 Jeep Cherokee
NO. The Crank Position Sensor gives a signal to the PCM to control the ignition (spark timing), not fuel injection or delivery. Please click on "Mark helpful" if you're happy with the respond. Good luck :-)
Ok so it's done this before and with a little finessing on the bottom of the gas tank it fired right up this time nothing no fuel to rail any opinions would be helpful
Hit Schroeder valve with key in on position and no fuel
Check fuses, relays and wiring before jumping to PCM and sensors. Also try holding down the valve while someone cranks the engine. Good luck :-)
Checked relay and switched it out. Put fuel in throttle body and it started but wouldn't stay running rail in bone dry not even a drop of fuel anymore insight??
bad fuel pump. Good luck :-)
Yeah figured thanks☠
Please click on "Mark helpful" if you're happy with the respond.
It was the fuel pump I actually had a bad code of #4 misfire as well and that went away guessing starving itself runs like a champ now thanks for the help
Looking for a Used Cherokee in your area?
CarGurus has 52,891 nationwide Cherokee listings starting at $1,900.
Search Jeep Cherokee Questions
Jeep Cherokee Experts
Related Models For Sale
Used Cars For Sale