Ho2s readiness test procedure
There is a rather lengthy drive "cycle" that can be performed to set all the OBD II readiness monitors right away. The procedure is too long to post here. But if you Google "OBD II readiness monitor drive cycle" I'm sure you can print it out from another website. If you can wait a few days just drive the car normally with between 3/4 & 1/4 tank of gas. Fuel level is important for all the tests to run to set all the readiness monitors. After 3 to 5 days all the readiness monitors will be set. HTH. -Jim
I didn't know about the fuel level stuff but just driving it normally should reset everything.
Yes, fuel level is important so the EVAP system readiness monitor will set. EVAP is the system that recycles gasoline fumes back to the engine to be burned up instead of being released into the air. -Jim
So what your saying is that a EVAPP system doesn't function with less than 1/4 or more than 3/4 of a tank until the monitors are set after about 5 days of driving.I say when the engine is in a closed loop pattern it will function no matter what.
Looking for a Used Sebring in your area?
CarGurus has 2,946 nationwide Sebring listings starting at $2,250.
Search Chrysler Sebring Questions
Chrysler Sebring Experts