How can one program a new key fob without a working one?
The only remote key fob on my 2003 Chrysler Sebring got wet and no longer works. I purchased a new one online and need to program it. Do I have to go to the dealership or can I do it myself?
thanks for your assistance
Dealership or a locksmith that has the equipment.
Manual Programming Procedure (non scan tool) 1. Connect pin 1 of the 16-way data link connector to chassis ground or to pin 4 of the 16-way data link connector. 2. Close all doors, turn ignition key to off. 3. Turn ignition key to Accessory. 4. Turn ignition to off, door locks will cycle once (in programming mode). 5. For each key FOB, press any button 3 times in a row to program code. When programming is complete, the door locks will cycle once.
Search Chrysler Sebring Questions
Chrysler Sebring Experts