20003 300m will not start after camshaft sensor replacement
Chrysler 300m 81,000. The car ran prior to me changing the senor, it took a while to
turn over, i would have to turn the key and hold it for a few seconds then it would
I checked code which was a po344 so I changed cam sensor with aftermarket sensor.
I started the car and let it run for a few seconds and then I cut it off, I did this twice.
I then torqued the upper intake bolts to spec and put the air box back on then I tried to
start the car but would not start. it cranks but will not turn over. I put the old sensor
back in (which was missing the paper gasket) but it still will not start with the old
I believe the cam controls fuel? I wasn't sure so I didn't want to flood the engine with
Where did you purchase the after market camshaft sensor ebay ? If so maybe bad buy one from the dealer or a parts store like auto zone.
Search Chrysler 300M Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Chrysler 300M Experts