location of blend damper
my truck is stuck on heat, the ac line is cold to touch when I put ac on, I partially took apart my dash board, I removed glove box and panel above glovebox, the box behind glovebox was also cold to the touch, so im assuming its a damper issue, just having trouble finding it, summer is coming and id like to do it myself, thanks for any help you can give
Copy and paste link below, I've uploaded a set of PDF instructions for a 2007 F150 temperature blend door removal and installation. https://drive.google.com/open?id=0B7qtH3Vy2sdBaWo4bWtjNmpEczA
Locate the blend door actuator. It's about the size of a cigarette pack, usually color black. It's actually a little plastic motor which moves the blend door from AC to heat. Remove, there should be a cog gear extending down into the damper. While connected, move the selector from cold to hot and make sure the motor is function. You'll see the little gear moving.
Looking for a Used F-150 in your area?
CarGurus has 198,107 nationwide F-150 listings starting at $1,300.
Search Ford F-150 Questions
Ford F-150 Experts