Hands Free Phone
I have a 2010 Town & Country. My Radio has a button for hands free phone but when I
press the button it says this function is not supported. What do I need to do to have this
work. If there is anything I can do. Thank you, Cindy
Link it via blue tooth see your owners manual, in audio,or hands free. If you still have issues contact chrysler they can walk you through it. Hope that helps
I do not think it has all necessary components as do not have a microphone in the car. I think the buttons are on the radio but that is all.
Paruse your manual,or contact chrysler if it wasnt set up for it,it wouldnt have been installed in van
Ok here it is chrysler.com/uconnect.you will have to download a pdf file DO NOT USE PHONE FOR DOWNLOAD. It will crash your phone hope that helps
Called the dealer. They said it would cost 560.00 to make it work with the needed components. Thanks for all your help.
I have the same situation and even the salesman she I could use it hands free. I think it is very misleading to show the button and not have it available
From the "2010 - UConnect User Manual" Pair (Link) Uconnect™ Phone to a Cellular Phone – Non-Touch-Screen Radio Only To begin using your Uconnect™ Phone, you must pair your compatible Bluetooth enabled cellular phone. To complete the pairing process, you will need to reference your cellular phone Owner’s Manual. The Uconnect™ website may also provide detailed instructions for pairing. The following are general phone to Uconnect™ Phone pairing instructions: • Press the (phone/handset) button to begin. (this will be on the console portion near the radio screen) • After the "Ready" prompt and the following beep, say "Setup Phone Pairing." • When prompted, after the beep, say "Pair a Phone" and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your cellular phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. • For identification purposes, you will be prompted to give the Uconnect™ Phone a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • You will then be asked to give your cellular phone a priority level between one and seven, with one being the highest priority. You can pair up to seven cellular phones to your Uconnect™ Phone. However, at any given time, only one cellular phone can be in use, connected to your Uconnect™ Phone. The priority allows the Uconnect™ Phone to know which cellular phone to use if multiple cellular phones are in the vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the Uconnect™ Phone will use the priority three cellular phone when you make a call. You can select to use a lower priority cellular phone at any time (refer to "Advanced Phone Connectivity" in this section). Pair (Link) Uconnect™ Phone to a Cellular Phone – Touch-Screen Radio Only 1. Press the MENU hard-key on the right side of the radio. 2. Then touch the System Setup soft-key to get to the System Setup menu. 3. Touch the Phone Pairing soft-key to access the Bluetooth Devices menu. 4. Press the PAIR soft-key to start a new pairing. 5. You can use the BACK soft-key to switch to the previous menu. 6. Enter any 4 Digit Security PIN and touch the PAIR soft-key again. 7. The pairing procedure starts. Refer to the user’s manual of your Bluetooth phone to complete the procedure. 8. You will then be asked to set a priority for the paired phone. If there is more than one paired phone available, the navigation radio will try to connect to the phone with the highest priority setting.
Looking for a Used Town & Country in your area?
CarGurus has 12,904 nationwide Town & Country listings starting at $899.
Search Chrysler Town & Country Questions
Chrysler Town & Country Experts