Ford Escape won't start
Ok changed the coils and plugs now my
2005 escape don't won't to stay crunk. It'll
start but die soon after? And one coil won't
fire what can be the issue! What are the
signs of ecm failure
If it started and ran before you replaced the parts then it is likely something you did is the problem. Go back over your work very closely.
Well I had a mechanic do it.. Bc it gave me a code to change the coils and plugs for cylinder 2
Probably not ECM failure. I'd replace all the plugs and recheck all your connections like Bob stated. You'll have to remove the upper intake to do so, there is a U2 video on how to do it. Get the upper intake gaskets too. Check all the vacuum lines to make sure they are hooked up correctly.
Looking for a Used Escape in your area?
CarGurus has 87,566 nationwide Escape listings starting at $1,150.
Search Ford Escape Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Ford Escape Experts