How do I find the dome/map light assembly for a 2009 Hyundai Santa Fe?
It could be just a blown bulb, carefully remove the lense and see if the bulb is black or has an obvious broken filament in the bulb.
Each bulb works fine when button is pressed. My dilemma is having them illuminate when doors open &/or keyless remote used to lock or unlock. I've already depressed the 'door' button feature for on/off with no success including the rear dome option. Dealer(s) have told me there's either a short or whole 'assembly' needs replaced. I am hoping to fine OEM part and replace myself if not too difficult. Thanks
09 there should be some in the salvage yards, might give one a try, it will be cheaper than dealer price.
There is a TSB on these vehicles dating back to 2007. While the issue was supposed to have been resolved, some with as new as 2012 models are still having it. I have a 2011 SE and it just developed the issue. You can find them used on eBay for around $50 but I am going to push to have the dealer stand behind it. Mine has 70K miles on it but this is a manufacturer's issue and they should repair it! Check with your local dealer concerning yours before spending any money. They can replace it or rebuild it depending on the exact depth of the problem. It has something to do with bad diodes in the assembly. Good luck!
Looking for a Used Santa Fe in your area?
CarGurus has 14,851 nationwide Santa Fe listings starting at $500.
Search Hyundai Santa Fe Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Hyundai Santa Fe Experts