I changed the throttle position sensor on my 2008 GMC Sierra twice thinking the 1st one was faulty. The check engine light is still on and the code indicates it's still the TCS. What else could the problem be?

I changed the throttle position sensor on my 2008 GMC Sierra twice thinking the 1st one was faulty. The check engine light is still on and the code indicates it's still the TCS. What else could the problem be? 5 Answers

2004 GMC Sierra 1500 4WD T series missing- Changed plugs and light is still on but not missing. What else could it be? 2 Answers

No oil leaks on the floor. There was some oil on one of the plugs. Truck started to miss the other day and I changed the plugs but the check engine is still on. Any ideas on what else this could be?

where is the camshaft position sensor on a 2015 gmc sierra 1500 5.3l engine? 4 Answers

I`m getting a code p0011.

I have a 2010 gmc sierra, I get that service traction control, stabilitrak, engine power reduced. I changed the throttle body but no change? (Engine light is always on) 3 Answers

I lose power and can't go pass 40 mph. I have to pull over and turn the truck off and wait a few minutes, until I can drive again. Truck goes loud, and sort of rattles. Mileage is 140 500 estimat...

I NEED A REAL GURU ON THIS ONE!!! 1993 GMC K1500 5.0L Have changed most of the fuel system but still having issues of not wanting to start. 5 Answers

The truck is a standard cab with an 8ft bed and 131" wheel base if that makes any difference. So here is the scenario: the truck was having issues of starting and then would start to stall and I wou...