2008 Kia Rio
I Replaced coils, plugs, and cam position sensor and it ran ok the other day it would not start so I towed it home the fuel pump was not engaging so I just replaced that now it will turn over but not start what step am I missing
There is an Ignition Capacitor that may be burnt out. And there is a crank shaft sensor that usually goes before the cam sensor. Also can you tell if the timing belt is not broke? Check the timing belt.
I did replace crankshaft sensor timing belt seems intact bit I will check the capasitor thank you
Long as it ran after you replaced the timing belt, then the capacitor is a good bet.
Looking for a Used Rio in your area?
CarGurus has 6,945 nationwide Rio listings starting at $1,700.
Search Kia Rio Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Kia Rio Experts