my Chrysler 300 makes a thud noise when i go over a bump. I have replaced the struts, tie rods and sway bar end links and it still makes that sound.

my Chrysler 300 makes a thud noise when i go over a bump. I have replaced the struts, tie rods and sway bar end links and it still makes that sound. 4 Answers

my Chrysler 300 makes a thud noise when i go over a bump. I have replaced the struts, tie rods and sway bar end links and it still makes that sound.

I have a 2007 Chrysler 300. One day the car is running fine. I put the key in the igntion and turn it and the radio and dash board lights go on. but the engine wont go on. I use my Autostart and the car starts right up. Can anyone pleae tell me what it could be . I thought it could be the Igntion Switch pin. 2 Answers

I have a 2007Chrysler 300. One day my car is fine. I get in my car I put the key in the igntion turn it on and the only thing that worked was the radio and the dash board lights.It would not start. ...

I have a 2008 Chrysler 300 and it is overheating. I have replaced the radiator cap and released the air with the bleeder valve when adding coolant. coolant gets trapped in my overflow then overheats. 15 Answers

I have not replaced the thermostat or anything like that. I don't know what else would cause the water to back up into the overflow.

I have a 2007 chrysler 300 when I tri to start it it makes a grinding noise and wont start could it be my starter 1 Answer

I HAVE A 2008 CHRYSLER 300 my problem is when I go to turn on the car I turn the key and it don't start right away I have to hold the key a couple of seconds for it to turn on then I let the key go. 2 Answers

Sometimes I turn the key, it turns on quick ... Sometimes I turn the key ,hold it on a lil bit , and then let go,a couple seconds later it turns on what might the problem be ...is it a fuse , a s...