I have a 2008 cobalt LT 2.2L with a misfire in #1 compression shows 35 psi what could be? any sugestions will be greatly apreciated thanks.
My 2008 cobalt has a misfire in #1 cyl. after changing the coil, spark plugs, injector still misfires, run a compression test and #1 shows 35.psi. hope is not the engine!
What did the other cylinders test at? If they were much higher, then I would say you have a bad piston ring on the #1 cylinder. Check out what this guy says on the first post....http://www.cobaltss.net/forums/2-0l-lnf- performance-tech-153/gm-compression-specs-273564/
thank you for the answer. the cylinders 2, 3, 4, read 150 psi steady. Will check in the post suggested Thank you again.
You have a stuck open or burned valve. Time for a valve job. HTH. -Jim
Looking for a Used Cobalt in your area?
CarGurus has 4,767 nationwide Cobalt listings starting at $2,000.
Search Chevrolet Cobalt Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Chevrolet Cobalt Experts