My Cobalt controll arm shaft bushings are starting to delaminate, how much driving can be done before they have to be replaced?

My Cobalt controll arm shaft bushings are starting to delaminate, how much driving can be done before they have to be replaced? 1 answer

I'm just trying to figure out what is going on with my car and what needs to be done. 1 answer

i have a 2007 chevy cobalt LS and just recently put a 2008 chevy cobalt motor in the car. as far as i could tell nothing was wrong with the motor. also had a radiator put in. after a week of driving...

2006 Cobalt. What would cause a cobalt to not start or be sluggish on start? 2 answers

My 2006 Cobalt sometimes will not start. It is sluggish when it finally does. I took it to the dealership and all they claim is that it is bad fuel. I have changed my fueling habits and it still do...

2008 cobalt not starting after recall replaced 3 answers

Our 2008 Cobalt has the ignition switch and cylinder recall and the dealer replaced the part. The invoice shows the part number for the ignition lock cylinder only, not the switch. Shouldn't there b...

When driving my 2007 Chevy cobalt, its vibrating is out of control. Its like im in a tornado, the steering wheel shakes to viciously. I have replaced the master cylinder, rotors, calipers and brakes 4 answers

Please help. this has been going on for over a year. Its getting worst. It feels so unsafe to drive but don't have a choice. Every time I take it to get fixed its fine for a couple days then starts al...