Drivers side Power window 2008 Jeep Liberty
My driver side window switch is not working for the
front windows, power locks and the power mirror.
But it is working for the two rear windows…
I first checked the fuse, and that is fine. I’ve been
replaced the switch with a used one and I got the
same exact result. So I thought it is not the switch.
Then I change the control module, no change. The
last thing would be the motor in the driver side door.
My question is… Does the motor in the driver side
door also control The power windows and locks?
What else could this be
try a master control switch from used auto parts yard to see if it corrects the issue.
I installed a used switch, from eBay motors seller with great rep. Had the same issue. With the new (used) switch, the back windows work but the front windows and the mirrors don’t. What’s the chances that 2 switches have exactly the same malfunction? Very low. - so it’s not the switch.
I have the same issue only I tested the power to the switch and there are only 2 out of 12 wires coming in with power. The problem seems to be a power problem which could be a fuse or another issue. I could really use some help. Any ideas?
Did anyone figure this issue out? I have the exact same problem
I am working on my buddy's 08 liberty.I found out several different master controls were used.He bought one with 3 pins and 9 pins(STANDARD DWS 1383).He needed a 8 pin and 13 pin.It generated the same fault-back windows only operating,front windows and mirrors not.That one is the only one that will work on his model.Count your pins on your original.Works on liberty's from 08-12 driver auto only,PN-STANDARD DWS1517.Hope this helps.
