I replaced the starter and the alternator and got a new dealer key
Thanks but I know what the code means but where do I go from here
and you programmed the key to the vehicle??
Yes the dodge dealer did
ok so you have power to the starter and the skim key code and programmed to the car ....// so you have spark and fuel ??...are you getting pressure out the exhaust ?? are you cats plugged ??....//and there are no other codes then the p0700?can you read crank and cam state with your scan tool and see if they are in sync ....//try unplugging the cam sensor and cranking it over to see if it will start sometimes one will short out the other and not set codes also try un plugging the map sensor
Thank you I will try it
ok keep me posted
Someone suggested it might be my flywheel
not sure about that maybe the crank sensor ...you know I didnt ask what size engine you have in it 3.5 or the 5.7
It is a 3.5
ok I would still try unplug the cam sensor
Ok I will thanks for everything
Looking for a Used Magnum in your area?
CarGurus has 901 nationwide Magnum listings starting at $1,995.
Search Dodge Magnum Questions
Dodge Magnum Experts