68 mustang front right shock will not line up have to pull it over on the top end to line up in the shock tower what could be wrong.
3 Answers
Peter answered 3 years ago
I hope this is not the case ... but your front end could be tweaked or someone could have removed the inner fender at one time and failed to mark it for reassembly ...
Your Answer
Related Questions
-
68 mustang front right shock will not line up have to pull it over on the top end to line up in the shock tower what could be wrong. 3 answers
1968 Ford Mustang Base
-
Maintenance & Repair
-
Does anyone know how to work the air controls on a 1966 mustang? I'm sure this is a standard Ford part.I'm not even sure what they're called, fan / air conditioning / force blown air, etc.. My 1966 mustang came with A/C standard. In the dash there are chrome controls for the air. One lever is horizontal and has about 5 notches that it clicks into place. It slides from left to right and back. Have no idea what that does. Directly underneath are three vertical levers.. The first one is labeled HEAT. I can't figure out if it being in the up position is turning the heat on or off. Next to that is TEMP. Next to that is a blank one. All three slide up and down. Does anyone have any idea how these work? I'm trying to get the heat to work and am freezing my a** off, as it seems to be blowing A/C. 5 answers
Air controls for 1966 Ford Mustang with A/C.
1966 Ford Mustang Base
-
Maintenance & Repair
-
Every time i turn the steering wheel it makes noises and i have power steering fluid up to the max line. what can i do to help make the noise stop? 4 answers
I can turn the steering wheel left and right and it just started making this awful noise and i checked the power steering fluid and its full. It may be the power steering belt is loose but i didn't th...
1994 Ford Mustang Coupe
-
Maintenance & Repair
-
my water pump just went out on my 2012 v6 Mustang. it is now idling badly, it will rev up to 2K and then drop to 800 (normal) any ideas what to check so i dont have to take it back to the dealership? 7 answers
the thermostat was also changed .... i do have a cold air intake on the car, just in case it matters, or if i have to flash the computer again.
2012 Ford Mustang V6
-
Maintenance & Repair
-
What could be the possible reasons my 91 Mustang turns over rev's to 3000 RPM's and cuts off? 2 answers
When I start my 1991 Mustang it will turn over, I step on the gas and it will rev to 3000 RPM's and cuts off.
1991 Ford Mustang LX Hatchback
-
Maintenance & Repair
Looking for a Used Mustang in your area?
CarGurus has 38,398 nationwide Mustang listings starting at $895.
Shortcuts
Search Ford Mustang Questions
Ford Mustang Experts
-
#1Tom DemyanReputation4,590
-
#2Bob BeamanReputation1,250
-
#3COMETGUY61Reputation1,110
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.