OK I got a Chevy cobalt LT coup. My brake light
comes on and goes off. Its got new brake no leaks.
I pulled the senser switch from resavor and light
still stays on. Does that mean I need a new
No pedal is not soft. If there was damage to a seal wouldn't there be a leak??
yes...an internal leak....you may note the fluid level has NOT dropped except for pad/shoe wear~
or is squirtin' out the back into the footwell~
have heard of restrictions in the brake lines (like if you ran over a rock, and bent that one) and contaminated fluid causing problems...guess you could take a look see at the switch to see if it has normal operation...or was bent by a toe or degraded plastic and is out of position~...really have nothin' left here...other then the master cylinder and lines leading to and from it...really nothing left...good luck~
yes re-reading you problem...just put the Switch Back where it was~ think you'll be okay then~
Looking for a Used Cobalt in your area?
CarGurus has 4,756 nationwide Cobalt listings starting at $1,719.
Search Chevrolet Cobalt Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Chevrolet Cobalt Experts