best way to replace front wheel studs on 97 integra

Asked by May 25, 2014 at 12:48 AM about the 1997 Acura Integra GS Hatchback

Question type: Maintenance & Repair

it doesnt matter if it the professional way or a little riged up, we just need a point in the
right direction, we are working with a very very small budget and home tools, thankyou

3 Answers

9,575

Remove tire,remove brake caliper,then remove brake rotor,you should be able to take a hammer and hit the front of the stud back to knock it out,,use wd 40 or pb blaster to breck rust loose if needed. then replace from back side of spindle.

3 out of 3 people think this is helpful.
62,985

And don't "rig them up"! They hold your wheels on, for heaven's sake!! -Jim

270

No, **You must*** remove caliper and hub as its sealed. There is no way to hit it through as its blocked by hub/bearings. Acura was made different and stupid.. took me an 1.5 hrs and Im an experienced mechanic. However you MUST remove hub!

Your Answer

Add photo

Related Questions

  • Tail lights out on my 97 integra 1 answer

    Bulbs replaced, fuses are fine wiring is ok. Why wouldnt my tail lights come on with my headlights.

    1997 Acura Integra LS Sedan

    -

    Maintenance & Repair

  • 95 integra tail light problem 11 answers

    the right tailight on my integra dosnt work when i brake i know you're thinking 'just replace the bulb' but the light workssuch as when i trun the lights on at night or when im setting my alarm after ...

    1995 Acura Integra LS Hatchback

    -

    Maintenance & Repair

  • how do i maintain the abs bypass on my 97 integra 2 dr something? 1 answer

    i got the car from my mom who told me her when her abs system needed maintenance or repair of some sort , the techs told her the part in need of replacement was located in a spot that was only acces...

    1997 Acura Integra GS Hatchback

    -

    Maintenance & Repair

  • 97 Acura Integra timing belt 2 answers

    I changed the timing belt and now the car will not start! I tore into it and found out that the rotor in the distributor is not facing the right plug wire! How could this happen when all i did was tak...

    1997 Acura Integra

    -

    Maintenance & Repair

  • Didn't know Honda made Integra 6 answers

    I believe that the integra was made by acura is that correct?

    2000 Acura Integra GS Hatchback

    -

    General

Integra

Looking for a Used Integra in your area?

CarGurus has 112 nationwide Integra listings starting at $2,950.

ZIP:

Search Acura Integra Questions

Acura Integra Experts

#1 Logan Saunders
Logan Saunders
Reputation 170
#1 FordNut
FordNut
Reputation 170
#3 Michael Konopka
Michael Konopka
Reputation 150
View All

Related Models For Sale

Used Honda Civic
510 Great Deals out of 81,592 listings starting at $558
Used Honda Civic Coupe
158 Great Deals out of 18,352 listings starting at $1,500
Used Acura TL
267 Great Deals out of 7,182 listings starting at $2,200
Used Honda Accord
739 Great Deals out of 82,789 listings starting at $500
Used BMW 3 Series
1,113 Great Deals out of 35,574 listings starting at $900
Used Ford Mustang
319 Great Deals out of 45,670 listings starting at $2,000
Used Mitsubishi Lancer Evolution
19 Great Deals out of 580 listings starting at $13,500
Used Acura NSX
322 listings starting at $32,900
Used Honda Prelude
91 listings starting at $2,900