How do I clear this problem?
With key on, all dash lights go off except oil light, check engine light (which
flashes intermittently). Checking fault code by turning key on and off 3 times
the only code is P5094. How is this cleared? When key is turned to start the
starter does not engage.
to clear codes unhook you battery and touch the 2 terminals together this will clear any memory left hook battery back up and done. Or buy a OBD2 scan tool. as for starter, sounds like a bad starter solenoid but i would want to know your getting 12 v from ignition switch before i draw any conclusions here
Right you need to test battery voltage, also check to make sure it hasn't blown a main fuse. P5094 is not a viable code, as this is an 07 you just simply cannot disconnect the battery cables to clear the system or you could loose all the factory presets in the BCM, but looking at what you have stated it sounds like that has already happened, so to get the system back up and operating it must be towed to a dealer and have the system re-flashed to match the Vin. Do any of the accessories work?
Search Chrysler Town & Country Questions
Chrysler Town & Country Experts