88 Fiero Sunroof Handle

Asked by JohnBoySS Jun 12, 2013 at 04:41 PM about the 1988 Pontiac Fiero Base

Question type: Maintenance & Repair

Anyone out there have an old parts 88 fiero. I need a sunroof handle. Not finding one anywhere. :(

23,395

- Report

Racer_X answered 3 years ago

Suggest you join one (or more) of the Fiero on-line owners/enthusiasts forum groups (just Google for them). Usually some of the members of these types of groups sell parts or can tell you where to get them. Try eBay as well.

Mark helpful

- Report

JohnBoySS answered 3 years ago

Thanks for the reply Racer_X. Been there, done that. Might turn up on eBay someday. :)

Mark helpful

- Report

Since1985 answered 3 years ago

http://boston.craigslist.org/sob/cto/3827376062.html Contact the seller in the link above. I went to check out the car and when we popped the hood, I noticed that there were a few bits of broken glass in there. The sunroof had cracked and he got a new one, but didn't clean it out very well and the handle was still floating around in there. I don't know if an '88 handle will fit, though.

Mark helpful

- Report

JohnBoySS answered 3 years ago

Thanks for the info. I just sent him an email. We'll see. :)

Mark helpful

Your Answer

Will a 1987 Engine fit in a 1988? 8 answers

A head gasket blew in my 1988 Pontiac Fiero GT and the mechanic says that I need a new engine. I found a complete 87 Fiero Motor V6 on Craig's List. Can I put the 1987 in my 1988 Fiero GT. Asking pr...

1988 Pontiac Fiero GT

-

Maintenance & Repair
1986 Fiero wont start 6 answers

It have been parked for a year it ran fine but it start when I use starter flud or put gas in air intake starts right away I know its a fuel problem when i hit the switch I dont hear the fuel pump com...

1986 Pontiac Fiero GT

-

Maintenance & Repair
I was cleaning the side of my door on my 1986 Fiero when I tripped the door latch. How do I release it so the door will close? 2 answers

I can't shut the door on my Fiero because I tripped the latch when I was wiping down the outside edge of the door.

1986 Pontiac Fiero SE

-

Maintenance & Repair
Engine swaping 5 answers

I have an 86 Fiero SE with a 2.8 that I destroyed. I bought another 2.8 from a blaser just for the block, but today as I was ripping the original fiero motor apart I noticed that the right side motor...

1986 Pontiac Fiero SE

-

Maintenance & Repair
are the frames the same with 86 and 88 gt's? or just front facias differant? 3 answers

1988 Pontiac Fiero GT

-

General