what does it mean if my pulley is slitely bent on my camaro 1990
1 Answer
bovan answered 10 years ago
Hello igotissues-- Several things could cause the pulley to bend. Needless to say, you will be replacing it. As you take it apart you will see possible causes, such as a bent shaft. Or perhaps a bearing went awry. Your answer will reveal itself as you complete this project. Good luck from Bovan.
Your Answer
Related Questions
-
what does it mean if my pulley is slitely bent on my camaro 1990 1 answer
what doe sit mean if my pulley is slitely bent on my 90 camaro?
1990 Chevrolet Camaro RS
-
Maintenance & Repair
-
Hey guys. I have a 1997 camaro rs. When my car reaches a certain temperature (180-195°) my car starts to sputter, and just shut off on me. What does this mean? And how can I solve it? 6 answers
Also, when I took it to my local mechanic shop a little while ago, I know that it needs a oil pan gasket, and a tune up. (spark plugs, wires, and o2 sensor) i was only able to put in 3 plugs and w...
1997 Chevrolet Camaro RS
-
Maintenance & Repair
-
My 1990 Camaro RS cranks in the on position.
My 1990 Camaro RS cranks in the on position. I replaced the transmission in the car and it started to crank in the on position, so I have changed the ignition module and it still does the same thing...
1990 Chevrolet Camaro RS
-
Maintenance & Repair
-
My 1997 camaro struggles sometimes to get up and go if u know what i mean. I know it has a purge flow problem that the check engine light kept coming on. So back in September wheni had to get it inspected I took it somewhere and they did something to it that the purge flow will never show up for the check engine light to come on. Let me know what u think I should do to fix it. 6 answers
My 1997 camaro struggles sometimes to get up and go if u know what i mean. I know it has a purge flow problem that the check engine light kept coming on. So back in September wheni had to get it ins...
1997 Chevrolet Camaro Base
-
Maintenance & Repair
-
what is the firing order for a V-6 on a 1990 chevy camaro RS 1 answer
I HAVE PURCHASED A CAMARO AND WAS TOLD ALL IT NEEDED WAS A FUEL PUMP. I REPLACED IT NEW AND A FEW OTHER THINGS AND ALL IT DOES IS FIRE BUT WONT STAY STARTED. I CHECKED LINES, BOUGHT NEW DISTRIB BUT NE...
1990 Chevrolet Camaro RS
-
Maintenance & Repair
Shortcuts
Search Chevrolet Camaro Questions
Chevrolet Camaro Experts
| #1 |
|
dandyoun
Reputation
1,740
|
| #2 |
|
carGrrl
Reputation
1,170
|
| #3 |
|
Tom Demyan
Reputation
1,070
|
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.