How do I bleed the air from the fuel line after replacing the fuel pump?
I have a 1991 camaro rs convertible and we just replaced the fuel pump...Everything looks right, and when we prime the injectors it tries to kick over, but it still won't start. We think we need to bleed the air out of the fuel line but I can't find the bleeder valve...any suggestions?
The bleeder valve is located on the passenger side of the fuel rail. Its located under a thumb screw cap. Depress the shradder valve with the switch turned on--be very carefull as the fuel pressure should be about 45pds at the rail. Also, I am assuming the car was running. If the car quit and you decided the fuel pump was the problem are you sure your ignition module didn't fail. The module is located inside the distributor.
Search Chevrolet Camaro Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Chevrolet Camaro Experts