VSC, Check engine, Traction control all on
Bought a 2007 Tundra 2x4 with only 3000 miles on it! Which means it was
pretty much sitting for 10 years. haha. Took it to dealer and got some EVAP
codes. Canister or lines maybe leaking. Then took tires off and found ONE of
my passenger side front brake pads completely worn down. Only one. so I
replaced all front brake pads, and lights all went off. friend said caliper could
be frozen but when we squeezed it, it still moves back and forth. All check
lights came back on again today. Could the brakes be the problem?
Sitting for ten years! Did you remove the old gas? If I were you I'm going to drop that thank, remove that gel like fuel and different scum then rinse it, replace the fuel filter too and blow the fuel line. I have the same problem with my car sitting for five years. When I finally revived the car it gives me different kind of code (CEL). After cleaning the gas line, tank and changed the fuel filter problems are gone.
Wow never even thought of that! I'll try it. Do you think the calipers freezing up can cause the VSC and track lights to come on as well?
If you get the vehicle scanned for ABS codes, and trouble codes they would tell you what to look for to fix on the traction control, and the VSC.
Looking for a Used Tundra in your area?
CarGurus has 39,631 nationwide Tundra listings starting at $2,900.
Search Toyota Tundra Questions
Toyota Tundra Experts
Related Models For Sale
Used Cars For Sale