- Home
- / Questions
- / Buick
- / Park Avenue
- / how to change low beam in 1998 park ave
how to change low beam in 1998 park ave
1 Answer
Jim answered 5 years ago
You have to remove the headlamp from the car. Unscrew the two large thumbscrews under the hood. Pull the whole assembly forward. Remove the low beam connector. Replace the bulb, being very careful not to touch it. Reassemble the headlamp back into the car and install the two thumbscrews.
Your Answer
Related Questions
-
how to change low beam in 1998 park ave 1 answer
1998 Buick Park Avenue FWD
-
Maintenance & Repair
-
My 1998 Buick Park Ave. 2 answers
I'm trying to figure out what could be wrong with my buick park ave. When I got it from my mother I had to jump start it to get it to start and once it finally started it ran good started on the fi...
1998 Buick Park Avenue FWD
-
Maintenance & Repair
-
1998 Buick Park Ave Ultra 6 answers
This car has been making two very worrying sounds... 1. At aprox. 1700RPM, the engine begins to make this "Hum" / "Growling" sound. Usually starts doing it right before shifting. [My rpm goes to...
1998 Buick Park Avenue Ultra FWD
-
Maintenance & Repair
-
how to change oil in 2000 supercharger? 6 answers
how do i change oil in 2000 supercharger and how often? can i substitute the oil that gm sells, with duralube.
2000 Buick Park Avenue Ultra FWD
-
Maintenance & Repair
-
low beam head lights will not turn on buick park ave 91 3 answers
every thing else work but low beams. for a while they were working most the time then just got worse till not work at all
1991 Buick Park Avenue FWD
-
Maintenance & Repair
Shortcuts
Search Buick Park Avenue Questions
Buick Park Avenue Experts
-
#1Jking1838Reputation1,190
-
#2jateen29Reputation970
-
#3Tom DemyanReputation860
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.