U have a 2004 Lesabre that i replaced the transmission in 2 months ago but the reverse lights don't work i put new bulbs in checked the relay and fuses and replaced the bulb sockets still no power
3 Answers
Js08016 answered 3 years ago
Sounds like the shifter cable is out of adjustment. Put it in neutral, with the ignition on. Do they light up? If so, shifter cable needs adjustment. If not, leave the key on and starting from park slowly move the shifter through all the selections. P, R, N, etc. If the reverse lights come on at anyttime, same thing. Shifter cable is out of adjustment. HTH. -Jim
Your Answer
Related Questions
-
U have a 2004 Lesabre that i replaced the transmission in 2 months ago but the reverse lights don't work i put new bulbs in checked the relay and fuses and replaced the bulb sockets still no power 3 answers
Checked the voltage just the reverse lights don't work and have no power at all
2004 Buick LeSabre Custom
-
Maintenance & Repair
-
2001 buick lesabre it sat in the winter for about 2 months because the alternator failed and i had another car so i didnt get to fixing it right away. when i replaced the alternator 1 answer
repaired the alternator let it warm up for awhile before driving it went to back up out of drive way and put it in gear i had no drive tried 3rd gear nothing tried 2nd gear i was able to drive it tr...
2001 Buick LeSabre Custom
-
Maintenance & Repair
-
Changed Maf senor, crankshaft, fuses, spark plugs. fuel filter and ignition modulator and the car starts but only runs about five mins. before stalling. No engine light comes on. No bad codes show up. Can't find any bad hoses. My mechanic teacher has looked and we can't figure it out. I am a student and can't afford to fix much more and nothing I have spent money on has worked so far. When I first put the maf in the car worked great for about a week but the transmission was still skipping 3 answers
Changed Maf sensor, crankshaft, fuses spark plug fuel filter and ignition modulator. Checked hoses. No engine light comes on no bad codes show up. After replacing maf the car worked great for a week ...
2002 Buick LeSabre Custom
-
Maintenance & Repair
-
Where is the Ignition Module on a 1990 Buick LeSabre? The car jumps. We have replaced the Idle Arm Pulley, the harmonic balancer, the starter. Fuel pump is working fine, but I seen on this sight that someone mentioned the ignition module and to have it checked. The check engine light stays on. Someone suggested the cam sensor might be bad. How do i get codes off of this car with the tester? Please help 4 answers
Car jumps now that we replaced the harmonic balancer. Could it be a bad one? The fuel pump has a psi of around 40 when tested. We also replaced the Idle Arm Pulley. We don't know how to pull code...
1990 Buick LeSabre Limited Sedan
-
Maintenance & Repair
-
My buick lesabre wont crank or turn at all.. just replaced the starter and I have a new battery and its full of power.. also did a bypass with the starter sylonoid and wouldnt start just run.Whatnext? 4 answers
I ran a wire manually from the starter sylonoid to another sylonoid right next to it and all it was doing was cranking and not igniting. (Just turning)while the key was on the on position.
2003 Buick LeSabre Limited
-
Maintenance & Repair
Looking for a Used LeSabre in your area?
CarGurus has 1,765 nationwide LeSabre listings starting at $750.
Shortcuts
Search Buick LeSabre Questions
Buick LeSabre Experts
-
#1Tom DemyanReputation2,270
-
#2John SaffrahnReputation2,020
-
#3Austin GabodaReputation1,440
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.