Driving along and #1 cylinder stopped firing
Perform a compression test on that cylinder, 120psi - 180 anything below 90psi cylinder wont fire. If compression is good. Coil pack,or injector maybe suspect, to test coil pack move coil pack to adjacent cylinder see if the misfire moves. Do not attempt to remove w engine running, damage to electronics,or personal injury may result, coilpack has about 10-15,000 volts during discharge.
Tried all that,wasn't cylinder 1 was #2....took to mechanic,exhaust valve spring broken, replaced that, not it, now what??
Id go with a bent valve in #2 cylinder if the spring broke did the valve drop and make contact with the piston? Compression test on cylinder # 2 is required, and see if your injector is pulsing with a noid light
Looking for a Used Town & Country in your area?
CarGurus has 13,939 nationwide Town & Country listings starting at $1,999.
Search Chrysler Town & Country Questions
Chrysler Town & Country Experts