What is the drive cycle for 2003 Chrysler Town and Country 3.8L?
I had to replace the catalytic converter on my van recently and it still won't pass
emissions, says its incomplete. I have driven it 150 ml since it's been replaced. My
brother wants me to find out the drive cycle and try that. Can anyone help me out?
Its normally 150 miles, but it has to stop and go traffic, like stop lights, slow traffic and highway driving 55 MPH or more. Keep Driving....
did you drive it at least 20 miles at say 55-65? chrysler zays to do that then let it cool down over night and do it again..if it did not learn all it had to......my chrysler was a ----- trying to get it to learn...stop and go in town didnt cut it...
You must keep the gas tank between 1/4 and 3/4 full. No more and no less in addition to following the above posted instructions. Since your Chrysler is an '03 model you can sneak through with 1, but only 1, of the readiness monitors not set. The EVAP one is the hardest to set. So if you can get all the others to set you'll be good to go. HTH. -Jim
this is correct..keep the gas above 1/4 tank..and run all your ac/ heater controlls also>>>>!!!
Looking for a Used Town & Country in your area?
CarGurus has 14,018 nationwide Town & Country listings starting at $1,800.
Search Chrysler Town & Country Questions
Chrysler Town & Country Experts
Related Models For Sale