Does changing the oil & filter automatically reset engine management?
No. ....1. Key in 0 or off position. 2. Press and hold odometer button and turn key to 1 or acc. position. 3. Keep button pressed until any of the following words appear in display: "oil service" or "inspection", with "reset" or "re". 4. Press and hold button again until "reset" or "re" flash. If there is no "flash", minimum consumption value has not been met. 5. While display is flashing, press button briefly to reset service interval indicator. After display has shown new interval, the following will appear in display for approx. 2 seconds:"END SIA"
Thanks for prompt / detailed response. I shall give this a go when I have changed the oil etc.
Hi Tom, tried what you suggested but no joy. Your instructions did get me into some dignostics (fordah indicators) but nothing about service or oil. Any other ideas thanks
Tom, thanks your initial instructions did work. I was being a numpty.
Looking for a Used X5 in your area?
CarGurus has 16,686 nationwide X5 listings starting at $2,788.
Search BMW X5 Questions
BMW X5 Experts