how to vaccume bleed a car
1 Answer
The clutch hydraulic assembly has been filled with fluid and bled of air at the factory. Do not attempt to bleed the hydraulic system. While the unit does not require periodic checking, it must be serviced, when necessary, as a complete assembly. The system is full when the reservoir is half full. Only DOT 3 brake fluid should be added to the system. If the fluid level drops, inspect the system, including the slave cylinder, for leakage. A slight wetting of the slave cylinder surface is normal. Fill the clutch master cylinder reservoir with brake fluid. Be careful not to spill brake fluid on the painted surface of the vehicle. .