2005 Chrysler Town and country. New blower motor and resistor installed. Motors turns but very little air comes out of vents. Was working before replacing motor

* Update to original question. I have a friend that works on cars. I took it to him and he said it was the controller. We replaced the controller and it still does the same thing. It's almost like it is clogged or the doors aren't opening. I also noticed when I turn on or off the recycler button, I hear when the door closes the motor still trying to push the door closed even though it is closed all the way. Any thoughts?

Problem solved. I took the motor area apart again and watched the way the fan was spinning. I put the old one in and noticed they were spinning in opposite directions. I cut the wires and reversed them and now it works. The fan was spinning the wrong way.

Blend door stuck shut