Help on a cylinder 3 misfire code. ..please! I have a 2007 PT Cruiser, no one can find the cause as of yet...
Changed plugs and wires, the light came
back on. Cleaned fuel injectors and
rechecked plugs, it came back on.
Compression tested, new coil pack, no
burnt exhaust valve, it is still on.
Is car skipping?
No symptoms at all.
Has some one reset the ecm yet?
Yes...a few times.
Did they use scanner,or just remove battery cable?
A scanner...all the connections were all good, it was reset through that in between each change to the car.
Sound,s like there may be a bad sensor,giving the ecm the false reading,or the ecm will not release the code,give me a few minute,s to do a little research on the sensor,s that would cause this,i love a challenge.
Thanks!
Ok,may have answer for you,It,s going to be,the camshaft sensor,or crank shaft sensor,if car is not skipping,and you have no sign of it running bad,just that engine light,check these ,i think they may help solve your mistery.
It will throw a misfire code,and fool the ecm in to thinking that,instead it will be one of them,that is bad,i say this only because you are running ok.
Diagram
Really...well after talking in person to about 8 mechanics and no one having any input as to what to do next, that's the best answer I've heard...at least I know where to look next.
Your help is really appreciated...I'm going to run with that!
You are welcome,and good luck with it,
I have the same issue with a 2008 and I have changed cram crank coil plugs and wires and it's still misfiring.
