Why isn't the reversing wire sending a signal to either the lights or the relay, that I use for my aftermarket reversing camera?
I was installing my aftermarket reversing camera to my aftermarket head
After instillation I noticed my reversing lights weren't turning on when put
into reverse gear, and the relay (I was told a relay would provide a constant
power rather than just tapping into the reversing wire) wasn't clicking.
I rechecked the configuration of the connections on the relay and it seems
to be wired correctly. I don't have any canbus errors showing up and all the
fuses and bulbs seem to not be blown.
I'm lost as to why it wouldn't be sending any signal or have an error that a
signal wasn't being sent at all.
Search Chrysler 300 Questions
Chrysler 300 Experts