no start after head gasket and timming belt replacement
I have a 06 Toyota sienna that the water pump seized on and broke the timming belt I pulled heads and checked for bent valves there where none. all held water for ever. I put every thing back on and car wont start. I have injector pulse and spark. I have fuel and air. I checked compression its at 120 across all cylders. It wont make a sound or even fire on either. I need help there are no codes and a new crankshaft sensor
Bad timing or maybe you got the spark plug wires backwards
pretty sure it is out of time
I have checked the timing every way even taken the valve covers off and checked the cams for correct timing. every thing lines up perfectly.
Did you check the spark plug wires? And have you tried starting it with starting fluid
yeah I check the plugs there coils on top of plugs wiring to them is correct. have tried starting fluid and still nothing. the plugs are a little dirty but to think they all failed at the same time isn't possible
Looking for a Used Sienna in your area?
CarGurus has 30,057 nationwide Sienna listings starting at $1,995.
Search Toyota Sienna Questions
Toyota Sienna Experts