1997 Z28 5.7L autotrans wont shift until 3000 rpms in all gears...
350 lt1 auto trans, wont shift until 3000rpms and the coast clutchs arnt
engaging between 800 and 2900 before it shifts if u let out of the gas, engine
idles and doent slow car down alomst like i have a clutch or shifted to neutral...
Has this rig been modified or a different transmission put in? This sounds like a late model tranny that has been put in trailer tow setting. You may have to go to a tranny shop too see if the TCM's programming has been altered or is corrupted for some unknown reason.
No all original, but I don't know if it has anything to do with my transmission, but my somtimes when in gear the car doesnt know where my foot is like the TPS looses connection, in park the TPS never misses a beat,
If the TPS has a problem the computer wont know the throttle position so it makes estimations on what it should be by using other sensor readings, and that alone could cause your shifting problems, I recommend that you take to a shop that can do live data scanning, that would be the cheapest route to take to find out if you have any sensor misreads or even grounding issues.
it runs fine when its warm outside like over 65 degrees, probably ground or wiring issue right?
Looking for a Used Camaro in your area?
CarGurus has 28,922 nationwide Camaro listings starting at $3,900.
Search Chevrolet Camaro Questions
Chevrolet Camaro Experts
Related Models For Sale